Craftmade ALS24FB3 Alexis 18\” Ceiling Fan review

Are you trying to decide if the Craftmade ALS24FB3 Alexis 18″ Ceiling Fan with LED Lights & Remote in Flat Black is the right compact fan for your space?

Buy Craftmade ALS24FB3 Alexis 18″ Ceiling Fan On Amazon

First impressions

You’ll notice this fan’s clean, modern silhouette immediately. The flat black finish and minimal blade design make it easy to picture in a variety of rooms, from a home office to a kitchen nook or covered porch.

Purchase The Craftmade Alexis 18″ Ceiling Fan On Amazon

Craftmade ALS24FB3 Alexis 18

$0.00   This item cannot be shipped to your selected delivery location. Please choose a different delivery location.

Product overview

You get two control options out of the box: an included WUCI-CCT handheld control and compatibility with Wi‑Fi via Smart by Bond so you can use most smartphones and smart devices. The fan ships with custom Alexis polycarbonate blades, a heavy‑duty 3‑speed reversible motor, and an integrated 24 watt dimmable LED light kit — all packed into an 18‑inch diameter unit.

Specifications

This table breaks down the key specs so you can see the important details at a glance. Refer back to it when you’re comparing models or planning installation.

Feature Detail
Model Craftmade ALS24FB3 Alexis 18″
Finish Flat Black
Blade Material Alexis polycarbonate blades (custom)
Blade Span 18 inches
Mounting Dual mount: Flat or angled ceilings up to 23°
Motor Heavy‑duty, 3‑speed reversible motor
Light Integrated 24W LED light kit (dimmable)
Controls WUCI‑CCT handheld control included; Wi‑Fi enabled Smart by Bond compatible
Special Features Dual mounting options; compact size; dimmable LED
Typical Uses Small rooms, bathrooms, hallways, covered patios (verify local suitability)

Design and build quality

You’ll appreciate how the fan balances compactness with a robust appearance. The flat black finish gives a contemporary look, while the polycarbonate blades are durable and resistant to warping—useful in areas with small temperature swings or higher humidity.

Blade design and material

The Alexis polycarbonate blades are lightweight and resilient, which helps the motor move air efficiently without excessive strain. Because they’re polycarbonate, they’re less likely to chip or crack compared with thin wooden blades, and they’re easy to wipe clean.

Finish and aesthetics

You can expect a matte, understated look from the flat black finish that fits modern décors well. The finish also hides minor dust and fingerprints better than glossy alternatives, which keeps the unit looking neat longer between cleanings.

Mounting and installation

You get a dual mount that supports both flat ceilings and angled ceilings up to 23°, giving you flexibility in where you place it. The smaller 18″ diameter means the fan is suited to tighter spaces, but you should still follow clearance guidelines that the manufacturer provides.

What you’ll need before starting

Make sure you have a normally rated ceiling electrical box capable of supporting a fan, basic tools (screwdrivers, pliers, drill if necessary), a ladder, and, optionally, a second person to help hold the fan during wiring and mounting. If you’re not comfortable with electrical work, you should plan to hire a licensed electrician.

Step‑by‑step installation overview

You’ll follow a typical ceiling fan installation flow: turn off power at the breaker, assemble the canopy and downrod (if applicable), secure the mounting bracket to the ceiling box, wire the fan to house wiring per the instructions, attach the blades and light kit, and test operation. The dual mount means you’ll either use the flat mount plate or the angle adapter for angled ceilings up to 23°.

Controls and smart features

One of this fan’s strengths is its flexibility in control methods. You can use the included WUCI‑CCT handheld remote for fast, reliable local control or connect via Smart by Bond to add Wi‑Fi control and integration with your smart home ecosystem.

Included WUCI‑CCT handheld control

The handheld control gives you immediate access to the fan’s 3 speeds, reverse function, and light dimming. If you prefer a tactile remote that doesn’t require Wi‑Fi, this is a convenient option that works right away after pairing.

Smart by Bond (Wi‑Fi) setup and features

When you use Smart by Bond, you gain the ability to control the fan with your smartphone or integrate it with voice assistants and automation routines. You’ll typically install the Bond app, follow pairing instructions, and connect the Bond hub to your local Wi‑Fi; after that you can control speed, light level, and scheduling from your device. Keep in mind you’ll need the Bond hub or compatible device for full smart control — the fan is “Wi‑Fi enabled via Smart by Bond” rather than shipping with a built Bond hub included.

What to expect from smart integration

You’ll be able to use timers, schedules, and remote control while away from home, and connect the fan to routines (for example, turning the fan and light on at a set time). If you rely on voice assistants, check compatibility specifics (Alexa, Google Assistant, etc.) on the Bond side as platforms and integrations can evolve.

Motor performance and airflow

The heavy‑duty 3‑speed reversible motor is intended to give you reliable performance with the option to reverse the blade rotation for winter vs. summer airflow patterns. Because the fan is a compact 18″, it’s designed for targeted airflow in small areas rather than circulating air across a large room.

How it feels in a small room

You’ll notice efficient airflow for spaces like bathrooms, closets, small kitchens, or porches. On the high setting it should provide a refreshing breeze in confined areas, while the lower speeds are great for gentle circulation or white‑noise purposes.

Reversibility benefits

Using the reverse function in winter helps redistribute warm air that accumulates near the ceiling, potentially improving comfort and efficiency when heating. In summer, the standard forward rotation creates a cooling breeze.

Lighting performance

The integrated 24W LED light kit gives you a bright, energy‑efficient light source with dimming capability. LEDs use less energy than traditional bulbs and have very long lifespans, reducing maintenance and operating costs.

Light quality and dimming

You’ll get consistent brightness from the integrated LED, and dimming lets you tune the mood from task lighting to softer ambient lighting. The included remote supports dimming controls; if you use Smart by Bond, the app should also let you adjust brightness levels.

Color temperature control

The WUCI‑CCT designation suggests control over correlated color temperature (CCT) — enabling warm to cool light adjustments — but be sure to consult the manual for the exact range and how to toggle CCT modes via the remote or smart controls.

Noise and vibration

A properly installed fan with balanced blades typically runs quietly. This model’s compact size and heavy‑duty motor should minimize wobble and noise if you follow the installation and mounting guidance.

What you’ll hear in normal operation

You’ll usually hear a gentle hum at higher speeds, and nearly no perceptible sound on the low settings if the fan is balanced and mounted securely. Excessive noise often traces back to loose screws, unbalanced blades, or an improperly stabilized ceiling box.

Energy efficiency and operating costs

The integrated 24W LED is efficient for lighting, and the small motor consumes comparatively little power when used in small rooms. Running the fan on lower speeds further reduces energy use while still improving perceived comfort and reducing reliance on HVAC.

Practical energy tips

You’ll get the most benefit by pairing fan use with HVAC strategies — for example, using the fan to make a room feel cooler so you can raise the thermostat a degree or two. Also use dimming features to lower light energy use when you don’t need full brightness.

Maintenance and care

You’ll find this fan easy to keep clean and running smoothly with simple periodic maintenance. The polycarbonate blades are easy to wipe with a damp cloth, and the sealed LED light reduces bulb changes.

Routine checks you should perform

Every few months, tighten screws on the canopy, blades, and mounting bracket, and inspect wiring connections if you notice flicker or noise. Clean the blades and light cover to maintain performance and appearance.

Troubleshooting common issues

If the fan wobbles, check blade screws and the mounting bracket for tightness, and make sure the ceiling box is rated for fan use. If the light flickers or the remote doesn’t operate, replace the remote battery or re‑pair the remote following the included instructions. For connectivity issues with Smart by Bond, ensure your Bond hub and phone are on the same compatible Wi‑Fi network and firmware is up to date.

Safety considerations

You’ll want to ensure the fan is installed on a properly rated, fan‑capable electrical box and that all wiring complies with local codes. Never work on the fan with power on, and if you’re uncertain about wiring, call a licensed electrician.

Location suitability and IP rating

If you plan to install the fan in a high‑moisture environment or outdoors, verify the manufacturer’s listed indoor/outdoor rating and any applicable IP rating. Polycarbonate blades handle humidity better than wood, but the electrical components must still be rated for damp or wet locations if you intend outdoor or semi‑outdoor use.

Who is this fan best for?

You’ll find this fan well suited to anyone needing an efficient, compact ceiling fan with modern control options for a small area. It’s a good fit for apartments, dorm rooms, small bedrooms, bathrooms, porches with overhead protection, or as task area ventilation.

Not ideal for large rooms

You shouldn’t pick this fan if you want whole‑room circulation in a large living room or open concept space — its short 18″ blade span limits the effective airflow radius.

Pros and cons

This section helps you weigh the strengths and potential tradeoffs so you can decide if the fan meets your needs.

Pros

  • You get two control paths: a handy WUCI‑CCT remote and Smart by Bond Wi‑Fi integration for smartphone and voice control.
  • Compact 18″ size fits tight spaces where larger fans won’t work.
  • Integrated 24W dimmable LED reduces bulb replacements and saves energy.
  • Dual mount allows installation on flat or angled ceilings up to 23°, increasing placement flexibility.
  • Polycarbonate blades are durable and easy to clean.

Cons

  • The 18″ blade span limits airflow for larger rooms; it’s targeted at smaller spaces.
  • Full smart functionality requires the Bond hub or compatible device — check whether that’s included or sold separately.
  • If you need a fan rated for direct outdoor exposure, verify the model’s damp/wet rating before using in uncovered outdoor areas.

Comparison with similar fans

When comparing this Craftmade fan to other compact fans, focus on control options, lighting, motor quality, and mounting flexibility. Many compact fans skip the integrated dimmable LED or don’t offer CCT control and smart compatibility.

Typical differentiators to check

You’ll want to compare ease of setup for smart platforms, blade material (metal vs. plastic vs. wood), motor reputation (brand and warranty), and whether the light is integrated or uses replaceable bulbs. Craftmade’s combination of remote + Smart by Bond compatibility is a strong selling point in this category.

Practical use cases and placement ideas

Choose rooms where the fan’s size and features shine. It’s particularly useful in small spaces that benefit from targeted airflow and integrated lighting.

Ideal rooms

You’ll get good value in bathrooms, laundry rooms, mudrooms, pantries, small bedrooms, home offices, and covered porches. It also performs well above a kitchen island in tight kitchen layouts where a full ceiling fan would be too large.

Mounting height and clearance

Make sure you follow recommended blade clearance from the floor and surrounding walls or shelving. Ceiling fans generally require a minimum of 7 feet from the floor to blade tips for safety and optimal airflow.

Setup tips for the best experience

A few small steps during installation and setup will improve performance and reliability long term.

  • Balance the blades during installation if needed; many small wobbles can be corrected with minor adjustments.
  • Use the angle adapter for sloped ceilings to keep the motor and blades aligned properly.
  • If you go smart, secure the Bond hub and ensure a stable Wi‑Fi signal; place the hub in the same room for initial pairing.
  • Regularly clean blades and light cover to maintain light output and airflow.

Price and value

You’ll find that the fan’s combination of features — compact size, integrated dimmable LED, reversible motor, flexible controls, and dual mount — generally places it competitively among small ceiling fans. The exact value depends on the retail price in your area and whether you need to buy a Bond hub for Wi‑Fi.

Getting the most for your money

You’ll maximize value by using both control methods: keep the handheld remote for quick local use and add Bond if you want remote access and smart home integration. Consider the lifespan of LED lighting and the reduced maintenance when calculating long‑term cost.

Warranty and support

Check Craftmade’s official warranty terms and retailer return policies for this specific model. You’ll want to confirm motor warranty length, LED coverage, and what’s covered in case of defects.

What to keep in mind

Retain your receipt and document model numbers in case you need warranty service. If you encounter setup issues with Smart by Bond, Bond’s support resources are typically the right contact for connectivity problems, while Craftmade handles physical fan defects.

Final verdict

If you need a compact, modern ceiling fan with flexible controls and integrated energy‑efficient lighting for a small space, you’ll likely be satisfied with the Craftmade ALS24FB3 Alexis 18″. The dual control options (WUCI‑CCT remote and Smart by Bond), durable polycarbonate blades, reversible motor, and dimmable 24W LED make it a versatile option for many targeted applications.

You should consider other options only if you need larger airflow for big rooms or if you require a fan explicitly rated for full outdoor exposure. For small to medium small‑footprint installations where smart control or a convenient remote is appreciated, this model checks a lot of boxes.

Frequently asked questions (FAQ)

This FAQ addresses common things you might ask before buying or after installation.

Do I need the Bond hub to use the smart features?

You’ll need a Bond hub or compatible Smart by Bond device to enable Wi‑Fi and cloud control functions. The fan is compatible with Smart by Bond, but check whether a hub is sold separately or included by the retailer.

Can I control light color temperature?

The WUCI‑CCT remote indicates control over color temperature (CCT), allowing shifts between warmer and cooler light. Refer to the user manual for exact instructions on changing and saving CCT settings.

Is this fan suitable for outdoor use?

You should verify the model’s damp/wet rating before installing outdoors. Polycarbonate blades tolerate humidity well, but the electrical components must be rated for damp or wet locations if you plan to install it in an uncovered outdoor area.

How loud will the fan be?

If installed correctly, you’ll find the fan quiet on low and moderate at high speed. Any excessive noise usually points to installation issues such as loose fasteners or an improperly secured ceiling box.

Can the LED be replaced?

This fan uses an integrated LED light kit rated at 24W. Integrated LEDs typically have a long life and are not user‑replaceable in the same way as a standard bulb; check the warranty and replace the entire light module per the manufacturer’s service recommendations if it fails outside typical lifespan expectations.

Closing buying tips

Before you buy, measure the intended space and clearing heights to ensure an 18″ fan is right for you. Check whether the retailer includes the Bond hub or if you’ll need to buy it separately. Finally, factor in installation — if you’re not comfortable with wiring, budget for a professional installation to ensure safety and best performance.

You now have a thorough breakdown of what the Craftmade ALS24FB3 Alexis 18″ Ceiling Fan with LED Lights & Remote offers and how it compares to typical needs in smaller rooms. If you want, tell me the room where you plan to install the fan and I can suggest placement, mounting choices, and whether this model is a good match for that specific space.

Get The Craftmade ALS24FB3 Alexis 18″ Fan On Amazon

Disclosure: As an Amazon Associate, I earn from qualifying purchases.